P-SQR Tecknologies

Simple sensor flooding or water level detects water amont 4 points on detector body (1D water detection). Sensor can be placed on wall or floor with dielectrict surface.  

Connects to  Ares or Poseidon2 using the 1-Wire UNI (RJ11) interface.

Features: 

• Connects as a RJ11 sensor to Ares / Poseidon2 LAN/GSM monitoring units.
• The sensor can be fully submerged.
• The middle hole facilitates mounting on a wall.

Applications and usage: 

• Detection: 1D water detection (at a specific point)
• Interface: 1-Wire UNI (RJ11)
• Cable length: 3m
• Connects to: Poseidon2 (LAN monitoring), Ares (GSM monitoring)
• Power supply: Powered from the 1-Wire UNI bus (RJ11)
• Environment: Indoor or outdoor use

Poseidon2 3266 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs.

A built-in web server is used for configuring. The device can be monitored remotely over the internet using the freeSensDesk portal in combination with the SensDesk Mobile application for iOS and Android. It works with HWg-PDMS andHWg-Trigger.

Poseidon2 devices are designed to monitor and control sensors and digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Poseidon2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.

Features: 

• 8x 1-Wire UNI/1-Wire Input; 4x Digital Input; Data Logger for more than 250.000 records; Digital Inputs feature 32-bit S0 pulse counters that retain their value even if the power fails
• 5x SNMP Trap; 5x E-mail; 5x "SMS+Ring" (via external GSM gateway or modem)
• MQTT compatibility allows connecting to IoT Hub, MS Azure, Bluemix Internet of Things and other cloud services.
• Connected via LAN. Configuration via built-in web server.
• A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail, SMS, SNMP Trap, or activates a remote relay at another Poseidon2 of Damocles2 unit.
• For Ring or SMS alarm use the HWg-Trigger software (external GSM modem required), or a HWg-SMS-GW3 gateway in the same LAN.
• With the HWg-PDMS software, S0 pulses can be converted to cost per time period and exported to MS Excel.
• Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in theHWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).

Applications and usage: 

• Remote monitoring in IT environments
• Connects to any SNMP system.
• Temperature monitoring at several places
• Cooler and freezer monitoring
• UPS monitoring
• Surveillance systems
• Industrial applications

Poseidon2 4002 can connect up to 42 sensors (16 via 1-Wire UNI/1-Wire + 26 via RS-485), provides 12 digital dry contact inputs (DI), 8 virtual digital outputs and allows control of 4 relay outputs (NO/NC).

A built-in web server is used for configuring. The device can be monitored remotely over the internet using the freeSensDesk portal in combination with the SensDesk Mobile application for iOS and Android. It works with HWg-PDMS andHWg-Trigger.

Poseidon2 devices are designed to monitor and control sensors and digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Poseidon2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.

Features: 

• 16x 1-Wire UNI/1-Wire Input; 26x RS-485 Input; 12x Digital Input; Data Logger for more than 250.000 records; Digital Inputs feature 32-bit S0 pulse counters that retain their value even if the power fails
• 4x Relay Output NO/NC; 8x Virtual Digital Output
• 5x SNMP Trap; 5x E-mail; 5x "SMS+Ring" (via external GSM gateway or modem)
• MQTT compatibility allows connecting to IoT Hub, MS Azure, Bluemix Internet of Things and other cloud services.
• Connected via LAN. Configuration via built-in web server.
• A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail, SMS, SNMP Trap, or activates a remote relay at another Poseidon2 of Damocles2 unit.
• For Ring or SMS alarm use the HWg-Trigger software (external GSM modem required), or a HWg-SMS-GW3 gateway in the same LAN.
• Virtual Digital Outputs (VDO) can be mapped to physical digital outputs (relays) of other Poseidon2 or Damocles2 units on the same LAN.
• With the HWg-PDMS software, S0 pulses can be converted to cost per time period and exported to MS Excel.
• Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in theHWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).

Applications and usage: 

• Server room environment monitoring
• Remote environmental monitoring in a cabinet or in a datacenter
• Air-conditioning monitoring
• UPS / back-up generator monitoring
• Industrial applications
• Cooler and freezer monitoring + alarm indication
• Temperature and other measurements in a cloud
• Surveillance systems
• Smart buildings

WLD (Water Leak Detection) sensing cable for surface 2D liquid detection.
Can be used as detector (relay output) or sensor powered from RJ11 and connected to 1-Wire UNI bus.

• Interface 1: 1-Wire UNI (2x RJ11 for daisy-chaining)
• Interface 2: Relay output (NO/NC) - connect to DI (Digital Input)

A correctly installed HWg-WLD cable based water leak detection provides extra time to solve flood problems. The 2D water leak detection can help fix the source of the leak before the costly consequences arise.

HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. By placing the cable near possible flood sources, the whole area can be effectively monitored.

The “WLD sensing cable” reacts to just a few drops of liquid (water, ethylene glycol, ...) and can be also used to detect condensation. After flooding, the sensing cable can be dried and reused. 
“WLD sensing cable“ can be easily extended with sensing and non-sensing cable segments to create a cost-effective and robust protection of a 2D area against flooding.

As a notable advantage, the “WLD sensing cable” does not produce false alarms when bent, twisted or pinched.

The "HWg-WLD" water leak detector unit can be ordered in a package with a 2m WLD liquid detection cable. Two versions are available – a version powered over the Ethernet (PoE – IEEE 802.3af) or a version with a mains power adapter.

HWg-WLD devices can work together with a central SMS gateway to send text messages (SMS), and can be connected to the SensDesk.com online portal or another software monitoring system by HW group. 

• Water leak detection in an entire 2D area using several sensing cables
• WLD sensing cable can be easily extended and does not cause false alarms
• Detects even the smallest volumes of liquids, sensing cable can be dried and reused

Poseidon2 3268 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs. Poseidon2 3268 can control 2 digital NO/NC relay outputs, as well as up to 8 virtual digital outputs(VDO) at remote Poseidon2 or Damocles2 units (M2M).

A built-in web server is used for configuring. The device can be monitored remotely over the internet using the freeSensDesk portal in combination with the SensDesk Mobile application for iOS and Android. It works with HWg-PDMS andHWg-Trigger.

Poseidon2 devices are designed to monitor and control sensors and digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Poseidon2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.

Features: 

• 8x 1-Wire UNI/1-Wire Input; 4x Digital Input; Data Logger for more than 250.000 records; Digital Inputs feature 32-bit S0 pulse counters that retain their value even if the power fails
• 2x Relay Output NO/NC; 8x Virtual Digital Output
• 5x SNMP Trap; 5x E-mail; 5x "SMS+Ring" (via external GSM gateway or modem)
• MQTT compatibility allows connecting to IoT Hub, MS Azure, Bluemix Internet of Things and other cloud services.
• Connected via LAN. Configuration via built-in web server.
• A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail, SMS, SNMP Trap, or activates a remote relay at another Poseidon2 of Damocles2 unit.
• For Ring or SMS alarm use the HWg-Trigger software (external GSM modem required), or a HWg-SMS-GW3 gateway in the same LAN.
• Virtual Digital Outputs (VDO) can be mapped to physical digital outputs (relays) of other Poseidon2 or Damocles2 units on the same LAN.
• With the HWg-PDMS software, S0 pulses can be converted to cost per time period and exported to MS Excel.
• Compatible with a range of third party SW (SCADA etc.). Examples for programmers on using the product are available in theHWg-SDK (Borland C++, MS Visual, VB, C#, PHP, JAVA and more).

Applications and usage: 

• Temperature alarms and a thermostat in IT
• Switching HVAC / ventilation in a cabinet
• Remote I/O control and monitoring over the Ethernet
• Surveilance systems
• Industrial applications
• Cooler and freezer monitoring + alarm indication
• Temperature and other measurements in a cloud
• Online web portal + mobile app
• Smart buildings

The SH4 is an ultimate access system that works with any electromagnetic lock and any RFID reader. It will work in your datacenter as well as in your office or even your home.